Explorist 510 Sat-Anzeige

Die neuen eXploristen auf WinCE Basis. Details, Hintergrundinformationen, Tips, Tricks, Erfahrungsaustausch

Moderator: S1G

Post Reply
hallal
Routenplaner *
 

Posts: 10
Joined: Thu Jun 04, 2009 8:45 am

Explorist 510 Sat-Anzeige

Post by hallal »

Hallo, habe den exmod und mit diesem IGO 8 benutzt. Nach dem Ausschalten von IGO und dem Einschalten von Magellan wird oben rechts das Sat-Symbol (die senkrechten Bälkchen) blinkend angezeigt. Der Sat-Empfang funkioniert aber ohne Probleme.
Hat jemand hier im Forum eine Erklärung für dieses Verhalten.
dimonster2
Ehrennavigator ****
 

Posts: 109
Joined: Thu Feb 26, 2015 2:00 pm
Location: Ukraine

Re: Explorist 510 Sat-Anzeige

Post by dimonster2 »

Try to switch the navigator off, remove batteries, insert batteries again an power on the navigator.
By the way, what is inside your eXmod.ini file?
hallal
Routenplaner *
 

Posts: 10
Joined: Thu Jun 04, 2009 8:45 am

Re: Explorist 510 Sat-Anzeige

Post by hallal »

Thanks for Your replay.
Exmod.ini file :
SDMMC\iGO8\iGO8.exe;iGO 8.3;1
\SDMMC\eXmod\Utilities\Suspend.exe;Suspend;0
\SDMMC\ozi\OziExplorerCE.exe;OZI CE;0

I resolved the Problem by switching the GPS off and then on again.
dimonster2
Ehrennavigator ****
 

Posts: 109
Joined: Thu Feb 26, 2015 2:00 pm
Location: Ukraine

Re: Explorist 510 Sat-Anzeige

Post by dimonster2 »

You can also try this:
1) connect your microSD card to PC
2) open "iGO8" folder
3) there should be the file "sys.txt". Open it using simple text editor (i.e. Notepad). Do not use MS Word or other powerful text processors.
4) find the section [gps] inside this file. If there is no [gps] section then create it
5) find the string "set_messages=" at the [gps] section. If there is no "set_messages=" string then create it.
6) edit this string adding "0" after "="

So, you shall get the following:
......
[gps]
set_messages=0
.......
7) Save the file "sys.txt", close your text editor, disconnect your microSD card from PC and return it to your GPS device.

This procedure will prevent the iGO8 software to send some unwanted messages to GPS chip. Those messages may switch the GPS chip from normal "NMEA data transfer mode" to 'Sirf binary data transfer mode".
User avatar
S1G
Senior Experte *****
 

Posts: 2704
Joined: Mon Jun 23, 2008 7:06 pm
Location: Land Brandenburg

Re: Explorist 510 Sat-Anzeige

Post by S1G »

Das war damals, als Sockeye den mod programmiert hat, das gravierendste Problem. In der Tat sollte in der EXMOD.ini der Aufruf von IGO8 mit der nachgestellten 1 versehen werden. Dadurch wird der GPS-Chipsatz resettet. Alternativ kann auch ein anderes Programm darin aufgerufen werden und mit dem Resetaufruf versehen werden. Danach funktioniert wieder alles wie gewohnt.
Also keine Angst, da ist nichts kaputt. Nur falsch eingestellt.
__̴ı̴̴̡̡̡ ̡͌l̡̡̡ ̡͌l̡*̡̡ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡͡ ̲|̡̡̡ ̡ ̴̡ı̴̡̡ ̡͌l̡̡̡̡._
ColorTrak, Triton400 Carbon Edition, eXplorist110, eXploristGC, eXploristTouch, eXplorist710
Post Reply